Skip to main content

Site Navigation

Your Account

Choose Language

Changes to "Advanced Series" with OpenEVSE v5 Introduction

Edit by Christopher Howell

Edit approved by Christopher Howell

Deleted
Added
Unchanged
Category
[ ]OpenEVSE Charging Stations
Type
[ ]how-to
Title
[ ]"Advance Series" with OpenEVSE v5 Controller
Introduction
'''Warning''' Assembly of a Electric Vehicle charging station requires wiring Alternating Current (AC) components that will be exposed to voltages from 100 to 250v. If you do not have the experience and knowledge required to safely work with AC voltages please consult with an experienced electrician for assistance and inspection of your work. [ … ] '''Note''' Regularly inspect your charging station. Pay special attention to excess heat, components, handles, and wiring will be warm but they should not be HOT... [ … ] '''Always''' Disconnect your charging station from power before performing an inspection and/or maintenance
Time Required Min
No estimate
Time Required Max
No estimate
Imageid
Before
After
Difficulty
Moderate
Author
Public
No
Summary
[ ]This guide provides step by step instructions to build an "Advanced Series" OpenEVSE kit.

Flags

  • In Progress added.

Documents

  • OpenEVSE_v5.pdf added.
  • Advanced_v5.pdf added.

Steps

Step #: 1
Before
After