Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Christopher Howell

Edit approved by Christopher Howell

Before
After
Unchanged

Step Lines

[title] Mount OpenEVSE to plate
[* black] Mount OpenEVSE Plus board with 5/8" screws from the top.
[* icon_reminder] Place nylon spacers between OpenEVSE board and mounting plate. Tighten Lock Nuts from the bottom. Do not over tighten.
[* black] Mount Ground block with 2 - 3/4" screws from the bottom. Tighten Lock nuts from the top.
[* icon_caution] Connect OpenEVSE Ground to the ground Block. Ensure connections are secure.
-[* black] Crimp Yellow connector to 10AWG wire. Screw to the Fuse block.
+[* black] Crimp Yellow connector to 10AWG wire. Screw to the Fuse block. Wire can come from excess from AC cord or J1772 cable.
[* icon_caution] Ensure crimps are secure. Do not solder connectors designed for crimping. Do not connect and disconnect terminal. If loose, discolored, or damaged replace immediately.