Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Christopher Howell

Edit approved by Christopher Howell


Step Lines

+[title] Introduction
+[* black] Testing is an important part of the OpenEVSE build process. This guide provides testing recommendation both for the user and those developing hardware and software.
+[* icon_note] OpenEVSE performs extensive self test during boot, before closing relays/contactors and while operating.
+[* icon_reminder] Basic Testing is recommended for all builders after building your charging station and whenever maintenance is performed.
+[* icon_reminder] Advanced testing shall be performed by hardware and software developers before releasing "Stable" firmware or a new hardware revision.
+[* icon_note] For builders wishing to better understand how a charging stations work, Advanced Testing may be performed.
+[* icon_caution] Many advanced tests require live AC Power. Use extreme caution when working near energized high voltage components.