Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Christopher Howell

Edit approved by Christopher Howell


Step Lines

[title] Service - Energy Monitoring
-[* black] OpenEVSE WiFi can send energy data to the Open Energy Monitor Service (EmonCMS). You can configure:
- [* icon_note] Default - OpenEVSE Servers at
- [* icon_note] Optional - Open Energy Monitor Servers at:
- [* icon_caution] Optional - If you prefer not to use an internet based service and keep data locally. You may setup your own EmonCMS setup using a EmonPi.
+[* black] Login the the OpenEVSE WiFi portal and click on the Services tab.
[* black] Click "Enable EmonCMS" in the services tab.
-[* black] Login to EmonCMS at . Click Setup (wrench Icon) => Device Setup
- [* red] Set node (0 - 9 Reccomended) on both WiFi and "Devices" on Server.
- [* green] Copy Device Key from EmonCMS to WiFi.
+[* black] Verify the server is set to:
+ [* black] Select https:// for the server if available to enable secure mode.
+ [* red] Set node (0 - 32) Matching the value chosen in the last step.
+ [* green] Paste the Device Key from EmonCMS to write-apikey.
+ [* black] Click Save