Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Christopher Howell

Edit approved by Christopher Howell

Before
After
Unchanged

Step Lines

-[title] Setup Energy Monitoring -- Inputs
+[title] Energy Monitoring -- Inputs
[* black] The Wifi Module will now try to connect to your Wifi Network.
[* icon_caution] If the WiFi module can not connect it will start up in Configuration mode as "OpenEVSE" again.
[* black] Go back to [http://data.openevse.com/emoncms/|OpenEVSE Energy Monitoring]
[* black] Select Inputs - The Inputs section should now display live data from OpenEVSE.
[* icon_note] Inputs from other sensors can be included such as additional current, temperature, humidity, voltage etc. See [http://www.openenergymonitor.org/emon/|Open Energy Project]
[* icon_reminder] Inputs displays live data from the sensors. This data is not stored, logged or archived.