Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Christopher Howell

Edit approved by Christopher Howell

Before
After
Unchanged

Step Lines

-[title] Setup Energy Monitoring -- Feeds
+[title] Setup Energy Monitoring -- Feeds (Manual)
[* black] Feeds take data from the inputs and logs the data to the database. Feeds can also manipulate the data before logging.
[* icon_note] Example you can take a volt feed and multiply a current feed to log a KwH value.
[* red] Create a Feed for each Input you wish to log. Click the Wrench icon on the right side of the Inputs page.
[* icon_caution] Energy Data from OpenEVSE is slowly changing. To avoid unnecessary data usage change log intervel to ***60s***.
[* icon_note] Tip - Add a feed for max value of temperature sensors (if Installed).