Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Christopher Howell

Edit approved by Christopher Howell


Step Lines

[title] Enclosure Lid
[* icon_reminder] Remove any protective film from the clear window.
[* black] From the front place a 10mm screw through one of the small holes.
[* black] Flip the lid. Stack the foam window seal then clear window.
[* black] Thread a Hex Standoff onto the screw.
[* icon_caution] Hand tighten only.
[* black] Repeat for the other 3 screws.
[* icon_caution] Hand tighten only.