Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Christopher Howell

Edit approved by Christopher Howell

Deleted
Added
Unchanged

Step Lines

[title] Mount Display
[* black] Mount button with O-ring seal on the outside. Screw on the large hex nut from the inside.
electronics
[title] Mount Display
[* black] Mount button with O-ring seal on the outside. Screw on the large hex nut from the inside.
electronics
[* black] Using 4 - 6mm screws. Mount display module to the lid.
[* green] Connect 4 pin connector to display module.
[* icon_note] Note the color that represents Ground (Black as Pictured)
[* orange] Connect the 3 position connector (2 wires attached) to the display module and the ends to the button.
[* black] Mount WiFi to the left of the button with the header pins to the far left.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Deleted