Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Christopher Howell

Edit approved by Christopher Howell

Deleted
Added
Unchanged

Step Lines

[title] Mount electronics
[* black] Using 4 - 6mm screws. Mount display module to the lid.
[* green] Connect 4 pin connector to display module.
[* icon_note] Note the color that represents Ground (Black as Pictured)
[* orange] Connect the 3 position connector (2 wires attached) to the display module and the ends to the button.
[* black] Mount WiFi to the left of the button with the header pins to the far left.
[* icon_caution] Flip lid over and tighten screws to fully the compress the watertight foam seal.