Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Christopher Howell

Edit approved by Christopher Howell

Before
After
Unchanged

Step Lines

[title] Mounting Plate
[* black] Position the plate with the FOUR holes for the OpenEVSE controller up top-left.
[* blue] Mount the FOUR 4.5 Hex x 10mm standoffs to the top side of the plate with FOUR M2.5 x 6 mm screws.
[* icon_note] Tip - use blue LOCTITE on each screw to ensure it remains tight.
[* red] Mount the [https://relays.struthers-dunn.com/configurator/450-series-power-relays|Struthers-Dunn relay] using TWO 1/2" self threading screws.
-[* green] Mount ground bar to the plate with ONE 1/4" self threading screws.
+[* green] Mount ground bar to the plate with ONE washer and ONE 1/4" self threading screws.