Changes to Step #8

Edit by Christopher Howell

Edit approved by Christopher Howell


Step Lines

[title] Controller Wiring
[* icon_caution] View OpenEVSE v5 Diagram in previous step for wires named below.
[* red] Connect the keyed wiring harnesses to OpenEVSE controller.
[* icon_note] Wire colors may vary.
-[* green] Connect the WiFI data cable to the controller with the green wire closest to the board edge.
+[* green] Connect the 6 pin WiFI cable to the controller.
+[* orange] Connect the 4 pin Display Cable to the controller.

Image 3

Old Version

New Version