Changes to Step #8

Edit by Christopher Howell

Edit approved by Christopher Howell

Before
After
Unchanged

Step Lines

[title] Controller Wiring
[* icon_caution] View OpenEVSE v5 Diagram in previous step for wires named below.
[* red] Connect the keyed wiring harnesses to OpenEVSE controller.
[* icon_note] Wire colors may vary.
-[* green] Connect the WiFI data cable to the controller wit the green wire closest to the board edge.
+[* green] Connect the WiFI data cable to the controller with the green wire closest to the board edge.