Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Travis F

Edit approved by Christopher Howell

Deleted
Added
Unchanged

Step Lines

[title] EV Cable
[* black] Insert EV Cable through the Cable Gland on the right and tighten.
[* icon_note] Route the ground and pilot wires low in the enclosure up the right side.
[* black] Thread '''ALL''' hot and neutral lines through the 4 wire GFCI coil with the orange self test loop. Do not thread the ground wire or pilot wire through.
[* black] Thread '''ALL''' hot and neutral lines through the 4 wire GFCI coil with the orange self test loop. Do not thread the ground wire or pilot wire through.
[* black] Thread only '''ONE''' hot line through the Current Measurement Coil.