Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Travis F

Edit approved by Christopher Howell

Deleted
Added
Unchanged

Step Lines

[title] High Power Connections
[* icon_note] Insert Input cable through the cable gland on the Left and tighten. This step will use the same relay screws left loose from an earlier step.
[* icon_note] Insert Input cable through the cable gland on the Left and tighten. This step will use the same relay screws left loose from an earlier step.
[* red] Connect [guide|26|AC Input 2|stepid=157] to the relay top left power terminal.
[* red] Connect [guide|26|AC Load 2|stepid=157] to the relay top right power terminal
[* black] Connect [guide|26|AC Input 1|stepid=157] to the relay bottom left power terminal.
[* black] Connect [guide|26|AC Load 1|stepid=157] to the relay bottom right power terminal