Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Christopher Howell

Edit approved by Christopher Howell


Step Lines

[title] Display Contrast
[* icon_caution] Power ON. Use caution.
[* icon_note] A OpenEVSE programmer can be used to power the controller to adjust contrast. Note there will be errors (this is normal) as not all systems are powered.
[* icon_reminder] In needed - Adjust LED contrast (VR-1) Be very careful not to touch any components while powered.
[* black] When adjusting, be gentle. Do not force past the stop in either direction. If forced past the stop, the part will no longer function.
[* black] Secure the enclosure lid. Tighten the screws slowly alternating across and top, middle and bottom.

Image 1

No previous image


Image 2

No previous image