Your Charging station can be built with AC input Left and J1772 Right or opposite. Flip mounting plate to desired position. Fuses will line up with AC input and relays J1772 cable.
Mount fuse block with 2 - 3/8" screws from the top and lock nuts on the bottom.
Position relays so the small tabs are to the outside for easier routing of low voltage wires.
Mount Relays with 2 - 3/8" screws from the top and lock nuts on the bottom.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.