Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 4 —

Step Type:

Drag to rearrange

Mount OpenEVSE Plus board with 5/8" screws from the top.

Place nylon spacers between OpenEVSE board and mounting plate. Tighten Lock Nuts from the bottom. Do not over tighten.

Mount Ground block with 2 - 3/4" screws from the bottom. Tighten Lock nuts from the top.

Connect OpenEVSE Ground to the ground Block. Ensure connections are secure.

Crimp Yellow connector to 10AWG wire. Screw to the Fuse block. Wire can come from excess from AC cord or J1772 cable.

Ensure crimps are secure. Do not solder connectors designed for crimping. Do not connect and disconnect terminal. If loose, discolored, or damaged replace immediately.

Your contributions are licensed under the open source Creative Commons license.