Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 8 —

Step Type:

Drag to rearrange

Prepare J1772 cable. Strip Cable back at least 8". Put Cable Gland on cable, it may take some effort depending on the diameter of the cable.

Ground and Pilot conductors should be 7" - 8" long.

One Hot conductors should be about 5" long and the other slightly shorter. Crimp Yellow QC connectors to the Hot Conductors AND a 22AWG wire for the AC Test connections.

Ensure crimps are secure. Do not solder connectors designed for crimping. Do not connect and disconnect terminal. If loose, discolored, or damaged replace immediately.

Your contributions are licensed under the open source Creative Commons license.