Testing is an important part of the OpenEVSE build process. This guide provides testing recommendation both for the user and those developing hardware and software.
OpenEVSE performs extensive self test during boot, before closing relays/contactors and while operating.
Basic Testing is recommended for all builders after building your charging station and whenever maintenance is performed.
Advanced testing shall be performed by hardware and software developers before releasing "Stable" firmware or a new hardware revision.
For builders wishing to better understand how a charging stations work, Advanced Testing may be performed.
Advanced Tests require live AC Power. Use extreme caution when working near energized high voltage components.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.