Power on OpenEVSE Charging Station with the GFCI coil with self test loop disconnected.
The OpenEVSE Charging Station should fail the boot process with "Error GFCI Self Test Failed" and indicate red on the LED/LCD.
If the Power on Self Test does not fail with the coils disconnected, check that GFCI Self Test is enabled in the Service Menu.
If GFCI self check is enabled and the test does not fail please refer to the Troubleshooting guide.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.