Insert the serial to USB adapt or and install the appropriate driver
The windows driver for the adaptor sold in the OpenEV store is here: Windows Driver
Using a terminal console (PuTTY recommended) set the COMM port to the USB-TTL adapter and the baud rate to 115200. Then click Open.
If you do not know the comm port you can go into the Device manager and look under Ports.
In the console window enter $ and press enter. You should receive a $NK response.
Next enter $SE 1. This will turn on local echo so you can see what you send. The response should be $OK.
Now enter the command $GV. The responce should be $OK followed br the Firmware version and the Remote API version.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.