Use the Holster as a template and mark the holes.
Drywall - Drill your holes with a 1/4" drill bit.
Insert the drywall anchor and screw in until flush with the wall
Wood - Drill through the wood or stud with a 1/8" drill bit.
Tip - Screw in the top screws first and tilt the holster up for easier access to the top holes.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.