Locate the sealed bag that contains 4 x 14mm screws, 4 x 6mm screws, 4 aluminum standoffs, a foam seal and a clear piece of laser cut acrylic. All parts requires for this step are in this bag.
Remove any protective film from the clear window.
From the front place a 14mm screw through one of the small holes.
Flip the lid. Stack the foam window seal then clear window.
Thread a Hex Standoff onto the screw.
Hand tighten only.
Repeat for the other 3 screws.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.