Skip to main content
Help

Site Navigation

Your Account

Choose Language

Editing Step 2 —

Step Type:

Drag to rearrange

Position the plate with the 4 holes for the OpenEVSE controller up top-left.

Mount hex standoffs to the top side of the plate with 6 mm screws.

Tip - use blue LOCTITE on each screw to ensure it remains tight.

Mount the Struthers-Dunn relay using 2 - 1/2" self threading screws.

Mount ground bar to the plate with 1 - 1/4" self threading screws.

Your contributions are licensed under the open source Creative Commons license.