Skip to main content
Help

Site Navigation

Your Account

Choose Language

Editing Step 5 —

Step Type:

Drag to rearrange

View OpenEVSE v5 Diagram in previous step for wires named below.

Connect both keyed wiring harnesses to OpenEVSE controller.

Wire colors may vary.

Connect DC Relay 1 GND (Black) to the bottom middle coil terminal. Tighten screw.

Connect DC Relay C +12v (Red) to the top middle coil terminal. Tighten screw.

Connect AC INPUT 1 to the bottom left power terminal. Start screw, but leave loose additional power wire added later.

Connect AC INPUT 2 to the top left power terminal. Start screw, but leave loose additional power wire added later.

Connect AC_TEST 1 and 2 to the top and bottom right power terminals. Start screw, but leave loose additional power wire added later.

Your contributions are licensed under the open source Creative Commons license.