Static sensitive - Lift controller by board edges or AC/DC power supply. Do not touch components.
Advanced Series Only
Connect the red wire on the UBEC WiFi power supply to +12v DC screw terminal on the OpenEVSE controller.
Connect the black wire on the UBEC WiFi power supply to ground screw terminal on the OpenEVSE controller.
Connect the pilot wire to the OpenEVSE controller.
Mount OpenEVSE controller to the hex standoffs with 6mm screws.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.