Skip to main content
Help

Site Navigation

Your Account

Choose Language

Editing Step 7 —

Step Type:

Drag to rearrange

Static sensitive - Lift controller by board edges or AC/DC power supply. Do not touch components.

Advanced Series Only

Connect the red wire on the UBEC WiFi power supply to +12v DC screw terminal on the OpenEVSE controller.

Connect the black wire on the UBEC WiFi power supply to ground screw terminal on the OpenEVSE controller.

Connect the pilot wire to the OpenEVSE controller.

Mount OpenEVSE controller to the hex standoffs with 6mm screws.

Your contributions are licensed under the open source Creative Commons license.