Mount Display to lid with 4 6mm screws.
Option 1 - No button. If your station is open to the public you may wish to configure via WiFi and not install a button.
Option 2 - Drill a 16mm hole between the menu icon and the center dimple and install the included mechanical button.
Optional Upgrade - Remove film from the double sided tape and mount touch button. Line up square grid area with the menu icon printed on the enclosure.
Remove film from the double sided tape and mount WiFi Module.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.