Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 3 —

Step Type:

Drag to rearrange

If your kit contains a Struthers and Dunn relay, continue here. Guide

Position the plate with the 4 holes for the OpenEVSE controller up top and the Earth Ground bus bar on the right.

Mount hex standoffs to the top side of the plate with 6 mm screws.

Mount ground bar to the plate with 2 - 5/8" self threading screws.

Note: The screws from the ground bar packaging are not used.

Mount the Packard relay using 4 - 1/4" self threading screws.

Mount OpenEVSE controller to the hex standoffs with 6mm screws.

Your contributions are licensed under the open source Creative Commons license.