Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 5 —

Step Type:

Drag to rearrange

View OpenEVSE v5 Diagram in previous step for wires named below.

Connect the keyed wiring harnesses to OpenEVSE controller.

Wire colors may vary.

Connect AC INPUT 1 to the bottom left power terminal.

Connect AC INPUT 2 to the top left power terminal.

Connect AC_TEST 1 and 2 to the top and bottom right power terminals.

Connect AC_RELAY 1 and 2 to the top and bottom middle relay coil terminals.

Connect the keyed 4 pin GFCI coil to the OpenEVSE controller.

Your contributions are licensed under the open source Creative Commons license.