Insert Input cable through the cable gland on the Left and tighten.
Connect AC Input 2 to the relay top left power terminal.
Connect AC Load 2 to the relay top right power terminal.
Connect AC Input 1 to the relay bottom left power terminal.
Connect AC Load 1 to the relay bottom right power terminal.
Sleeve Ferrules must be installed on cable ends. "Standard" cables purchased from OpenEVSE include pre-crimped ferrules. Digikey Part
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.