Skip to main content

Site Navigation

Your Account

Choose Language

Step Type:

Drag to rearrange

Connect the 4-pin GFCI CT connector to the OpenEVSE board. This coil has two black wires and two orange self-test wires looped through the coil with a 4 pin connector. Orange Self test wires positioned to the inside Black GFCI CT wires to the outside.

Deluxe kits - Connect the current measurement CT to the 2 pin connector (either direction is fine).

Connect the EV control pilot (CP) line (see below for common colors) to the OpenEVSE pilot screw terminal connection.

OpenEVSE Quick Charge Power and Tesla PURPLE, Leviton ORANGE, Yazaki BLUE

Your contributions are licensed under the open source Creative Commons license.