Mount OpenEVSE board to the mounting plate with hex stand-offs and (8) - M2.5 x 6mm screws.
Mount ground bar from the top to the mounting plate using (2) - 5/8" self-tapping screws.
Mount the Packard C240C contactor from the top to the plate with (4) - 1/4" self-tapping screws.
Do not over-tighten the self-tapping screws. Tighten only until fully threaded and secure.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.