Skip to main content
Help
/

Site Navigation

Your Account

Choose Language

Editing Step 7 —

Step Type:

Drag to rearrange

Thread BOTH AC lines through the Ground Fault Coil (4-pin). If you are using the OpenEVSE 40A J1772 Cable, this is both the red pairs AND the black pairs.

Thread one AC line (either side Hot1 or side Hot2) through the current-measurement CT (2-pin OpenEVSE Current CT) . If you are using the OpenEVSE 40A J1772 Cable, this is either the red pair OR the black pair of wires.

Your contributions are licensed under the open source Creative Commons license.