Help
Jack Gratteau
@jackgrat
Jack Gratteau
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 06/05/2022 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 06/05/2022 | |
If you can’t get the Plug here - it is on Amazon B08XWD2XHX
I didn’t have the crimp tool - my Weller Soldering Iron was OK for the small terminals, but no way was that going to get the large terminals done.
But I do have a spot welder - and that was perfect to instantly heat the terminal - each #8 wire was pre-tinned using the Weller - which then made a tight fit in the terminal
When I clamp it with the spot welder across the barrel - more solder at the ready - toggle the welder and the barrel quickly hits temp - add fresh solder at the wire joint - spritz with water spray to cool.
O-Rings never got toasty - perfect fit.