Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
  1. Setup Free account at: OpenEVSE Energy Monitoring Enter Username, Email and Password to register for an Account.
    • Setup Free account at: OpenEVSE Energy Monitoring

    • Enter Username, Email and Password to register for an Account.

    • On the account screen copy your Write API Key.

  2. Connect the cable to the OpenEVSE Board and Wifi Module. The header is the common FTDI format.
    • Connect the cable to the OpenEVSE Board and Wifi Module.

    • The header is the common FTDI format.

    • Pin 1 - Ground (Black)

    • Pin 3 - 5v (Red) - 75ma max Higher power devices must use external power.

    • Pin 4 - Recieve (Yellow) connects to transmit on the remote device.

    • Pin 5 - Transmit (Green) connects to receive on the remote device.

    • New line.

Christopher Howell

Member since: 7/5/14

7,645 Reputation

23 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 10

Past 30 Days: 50

All Time: 30,765