Skip to main content

Site Navigation

Your Account

Choose Language

  1. The Charging station will boot with the Default network and password.
    • The Charging station will boot with the Default network and password.

    • Network: GoPlug_XXXXXX

    • Password: gopluggo

  2. Join the GoPlug_XXXXXX network with a wireless phone, tablet or laptop. Use password gopluggo
    • Join the GoPlug_XXXXXX network with a wireless phone, tablet or laptop.

    • Use password gopluggo

  3. Open a Web Browser, some devices will open the GoPlug Portal automatically. If the Portal does not automatically open, enter goplug.local or 192.168.4.1 for the address.
    • Open a Web Browser, some devices will open the GoPlug Portal automatically.

    • If the Portal does not automatically open, enter goplug.local or 192.168.4.1 for the address.

    • Select your WiFi network

    • Enter your password

    • Click Connect

  4. Your station will reboot join your network. Re-join your WiFi network with your phone, tablet or laptop.
    • Your station will reboot join your network.

    • Re-join your WiFi network with your phone, tablet or laptop.

    • Connect with your station using a Web browser and the address goplug.local

    • If goplug.local will not open reboot your station and note the numerical address displayed on the display. Enter this address in your web browser.

  5. The GoPlug tab provides the management of most charging functions. View Status
    • The GoPlug tab provides the management of most charging functions.

    • View Status

    • Pause or Resume Charging

    • Set Start and Stop Timers

    • Set Session options charge for xx minutes or add xxx kwh.

    • View sensor values

  6. The System Tab provides management of the WiFi Module.
    • The System Tab provides management of the WiFi Module.

    • WiFi Setup, view statistics or join a new network.

    • Administration, set a username and password for GoPlug WiFi for enhanced security.

    • WiFi Firmware, update the WiFi Firmware (See Guide) or reset to factory defaults.

  7. The Services tab provides the ability to connect and manage external services.
    • The Services tab provides the ability to connect and manage external services.

  8. If you need help please contact OpenEVSE Support via Email at support@openevse.com
    • If you need help please contact OpenEVSE Support via Email at support@openevse.com

Finish Line

Christopher Howell

Member since: 07/05/2014

5,866 Reputation

20 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 21

All Time: 342