Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
    • Testing is an important part of the OpenEVSE build process. This guide provides testing recommendation both for the user and those developing hardware and software.

    • OpenEVSE performs extensive self test during boot, before closing relays/contactors and while operating.

    • Basic Testing is recommended for all builders after building your charging station and whenever maintenance is performed.

    • Advanced testing shall be performed by hardware and software developers before releasing "Stable" firmware or a new hardware revision.

    • For builders wishing to better understand how a charging stations work, Advanced Testing may be performed.

    • Many advanced tests require live AC Power. Use extreme caution when working near energized high voltage components.

    • EVSE states can be tested with a few resistors and a diode, and EV Simulator or an EVSE Tester.

Christopher Howell

Member since: 7/5/14

7,645 Reputation

23 Guides authored

View Statistics:

Past 24 Hours: 2

Past 7 Days: 17

Past 30 Days: 87

All Time: 15,219